|
Post by grävling on Apr 24, 2017 6:15:12 GMT -5
I have a Mesa Radiate-Seal, a Resource Processor and some Hyperion Exo Suits. They have seen heavy use -- I have been exploring a whole lot. Every time I go to the Stardock for repairs, they only show the same 2% or 8% that all my ship components get. There is no indication that they have been damaged by Exploration.
|
|
|
Post by fallen on Apr 24, 2017 10:26:00 GMT -5
Sure, will take a look #3602
|
|
athios
Templar
[ Star Traders 2 Supporter ]
Posts: 1,611
|
Post by athios on Apr 24, 2017 12:49:40 GMT -5
In the Results text (after picking a card), do you see the text that says "XYZ component did blah blah and got damaged by %, need to maintain..."?
Just wondering if this is because the component is not firing, or if damage isn't being applied.
|
|
|
Post by fallen on Apr 24, 2017 13:08:56 GMT -5
If the results card mentions that the component is damaged, the component was used and is damaged.
|
|
|
Post by grävling on Apr 24, 2017 14:01:33 GMT -5
The card says it was damaged. Repeatedly. I'm just not seeing the damage. I don't think my on board engineer should be that good at repairs that I should never see a badly damaged one at the starport.
|
|
|
Post by fallen on Apr 24, 2017 14:04:37 GMT -5
If the results card mentions that the component is damaged, the component was used and is damaged. Just explaining expected behavior.
|
|
|
Post by fallen on Apr 25, 2017 21:46:44 GMT -5
#3607
|
|
|
Post by Cory Trese on May 9, 2017 12:21:13 GMT -5
Fixed for next.
|
|